Suggested Service Schedules

Express Dual

Daily:

	Clean mainshaft (remove oil)
	Clean mainshaft (after grinding) with WD40 or equivalent
	Leave a protective film of lubricant on shaft
	Dress grindstone lightly to keep it true

Weekly:

	Clean fork and traverse pickup shafts
	Brush molycote onto contact surfaces of fork driver
	Clean traverse chain (brush off any grinding debris)

Monthly:

Check chain tension

6 Monthly:

	Lubricate traverse chain
	Check play (key) in sleeve and nut
	Check condition of flexible coupling on reel drive (look for cracks in rubber)
	Brush feed screws with molycote

12 Monthly:

One shot of grease to any mainshaft bearings fitted with grease nipples

Lift Table

Monthly:

Visual check for loose fastenings/hydraulic leaks

3 Monthly:

	Check hydraulic fluid level
	Raise table to top of its travel and check platform level (adjust as necessary)
	Lightly oil table pivot points

12 Monthly:

	Raise table to top of its travel
	Remove the cover from the mechanism and lightly grease the chains
	Apply a little grease to the post (guide) channels